切换到中文版(Chinese Version) Repair and Maintenance Materials Needed for Road TEl: (+86)15954977877
HUATONG
PRODUCT CENTER
TEL
86-0535-8956399

TEL:

86-0535-8956399
TEL:+86 535 8956399
E-mail:Ella@yantaihuatong.com
sales@yantaihuatong.com
lisa@yantaihuatong.com
Address:Zoujia Village, Donglai street, Longkou city, Shandong Province, China.

Technical

Position:Home > Technical >

How to operate our adhesive crack tape?

Time:2018/08/07 Hits:
1.Choose the specification /size according crack width. There are three size: 8cm, 5cm and 3cm.
2.Clean the cracks. Keep the cracks without large protrusions, sunken, looseness, gravel or oil marks and grease. If there is a larger pit, it must be filled.
3. Remove the release paper on the back of the adhesive crack tape, and stick the adhesive crack tape on the road surface with the non-adhesive surface facing up.
4. In case of irregular cracks, paper cutting knife or scissors can be used to cut off the tape and follow according to the direction of the cracks. However,  80-100mm overlap should be formed at the juncture.
5. After construction , the finished road surface shall be protected in order to avoid pollution and damage .
 

FORWARD:How to store cold mix asphalt?

NEXT:NONE

Return